Categories

System malfunctions and false alarms can be aggravating, and more importantly, may prevent your home’s security from working the way it should. Luckily, most problems, from false alarms to dead batteries, are easy to remedy. Take a look at our suggestions for troubleshooting your home alarm system in Lubbock. We’ll help you keep your family shielded and your system operating smoothly.

Test Your Home Security System In Lubbock

One effective way to troubleshoot your property’s security is to test it! The latest systems allow you to place them in test mode to prevent you from initiating an emergency call. After switching to test mode, take these steps:

• Activate your system as you would when leaving.
• Open a door or window that uses a contact sensor, or test other sensors. Shut the door or window once you’re done so it doesn’t trip the alarm as you switch out of test mode.
• Let the alarm resonate for 60 seconds to ensure communications with the security company and to create an entry in the alarm activity log.
• Proceed to test devices as needed
• Check the system activity log to confirm functionality.

No need to worry, monitoring agents can tell that your system is involved in a test. Just make sure to switch out of test mode when done. It’s smart to test once a month or anytime you change your home’s internet or phone connectivity.

Check The Placement And Condition Of Motion Sensors

Although an essential element of your alarm system, motion sensors are notorious for false alarms. Do your part to prevent them with a few straightforward troubleshooting steps.

• Conduct a physical check. Are there things that could shift within the sensor’s detection area, like drapery blown in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and grime can lead to malfunctions. Check to confirm the device is clean.
• Does the motion detector come with pet immunity you can turn on? Some models can be programmed to disregard pets up to 100 pounds.
• When was the battery replaced? A low battery might impact performance or lead to false alarms.
• Is the sensor pointing toward a source of heat? Excessive heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Notifications

One helpful perk of the latest home security systems is that they’ll alert you when batteries are getting low. If your system has a control panel or smartphone app, you’ll typically see alerts there. Depending on your alarm, you might hear an occasional beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that need to be replaced every so often. It’s best to keep batteries on hand and set a replacement schedule. Top systems also include a rechargeable backup battery for the primary control panel. This backup keeps your system operating if your power goes out and should charge back up once power is back online. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Easy With ADT Home Security In Lubbock 

As the leading name in home security, ADT builds systems that offer unrivaled functionality and convenience. Switching to test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always receive alerts when a battery is running low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Lubbock home and family. Call (806) 302-1344 or complete our form today!