One perk of having your home security hooked up professionally is that you rarely have to worry about it. However, there will likely be a couple situations where you need to reset your alarms in Lubbock. If you’re utilizing a smart command hub, your system reset normally takes one or two taps of the touchscreen following a false alarm, power outage, or battery change.
Read The Manual Before Resetting Your Alarm
A word to the wise before you begin to reset your Lubbock home security system, check your instruction manual first. You wouldn’t want to undermine your system because you hit something incorrectly. In addition, your system might have changed if you moved from a number pad to a modernized touchscreen interface. And if you can't reset your system, don't hesitate to contact the professionals.
Resetting Your Lubbock Home Security System After A False Alarm
Generally, a false alarm takes place because of a sensor that was tripped by accident. You are able to utilize the central hub or open the ADT mobile app and tap the shield icon and type in your credentials to switch off the alarms when this occurs. You might receive notification from your security monitoring team, but just tell them you experienced a false alarm.
Resetting Your Alarm After A Power Outage In Lubbock
If the power goes out from high winds or other factors, you may start hearing a steady beep from your alarm’s central interface. This lets you know that your home’s defense is using the backup battery. To reset your equipment and stop the beeping, you need to take steps to disarm and rearm your security.
However, if you lose power for an extended time, you may need a total reset of your system. Heed the directives in your user’s handbook -- usually by putting in your unique passcode and tapping the on/off button twice -- and you should be back in business. You may still hear chirping caused by the secondary power source, as it might not end until your battery is fully charged. Reach out to your home security agent if you keep having issues with your ADT system 20 hours after power is restored.
How To Reset Your Home Security System After Switching Out A Battery
On occasion you must replace a battery in one of your home security components. In order to accomplish this, you want to set your system to test mode so you prevent setting off an accidental alarm. After the new battery is put in place, move the system from Test Mode and resume normal operations. If the control panel fails to recognize the component or the battery indicator remains on, you may need a full reset of your security system.
Reset Your Lubbock Security System Following The Addition Or Deletion Of A User
Adding and deleting personal codes can be accomplished on your ADT Command hub and your ADT smartphone app. You shouldn't have to perform a system reset when deleting or adding a user or code. However, if you find yourself moving to a new house with an existing ADT security system, you need to call your security specialists at (806) 302-1344 to set up a new plan. The installation tech will go on site to replace equipment, place more devices (if needed), and perform a full reset.
A Well-Designed Security System Is Only A Call Away
Figuring out how to reset a home security system in Lubbock will likely be a challenge if it fails to include clear equipment and instructions. If the time has come to acquire your intuitive home protection system, contact (806) 302-1344 or send in the form below. We’ll be ready to customize the ideal security system for your property.